PDF Version DemoObjective of Cisco 100-105 Exam
The objective of the exam is to test knowledge of basic internetworking technologies. This includes TCP/IP protocol specification, operating Cisco IOS Software, troubleshooting interface, protocol logic, and implementations of advanced protocols. Publish Cisco 100-105 exam. The exam is a Cisco Certification, and it tests that the candidate for this certification has passed three exams. Dexplanation of basic networking concepts. Implement and configure Cisco routing solutions by studying the modules in the blueprint. Improve productivity of network engineers that are responsible for maintaining networks. The functional objective of this exam is to validate that the candidate has the knowledge needed to install, verify/trouble shoot basic Cisco Network Programmer concepts. Covered Technologies Data transfer methods. The exam does not cover routing protocols. Ask your instructor for more details if you are aiming for this certification. Improved connectivity. The main benefit of Cisco 100-105 exam is the establishment of network connectivity. The basic knowledge of this exam is to establish a TCP/IP connection between two hosts or networks, without the use of a router. Different layer 2 and layer 3 addressing methods.
Pinging, sends out a packet and waits for a reply. If the packet gets to the destination, it will return an ICMP (Internet Control Message Protocol) error message. This is the first step towards establishing communication between two devices. Card Control Protocol (CCP), physical properties, such as speed and duplex mode, are negotiated using the CCP. Link Control Protocol (LCP), LCP is responsible for establishing and configuring a connection between two devices. Functioning of LCP is similar to that of the well-known Telnet protocol which are also covered in our Cisco 100-105 Dumps. This protocol is used to establish and maintain a connection between two devices. Control Protocol/Internet Protocol (IP/IP), IP is used to enable communication between two different devices. It is the only layer 3 protocol. This protocol provides addressing, routing, and data transfer functions. Routing Information Protocol (RIP), RIP is used to distribute routing information within a network.
Segments, a segment is a collection of data that contains the source, destination, and hop count. The length of a TCP/IP header is determined by the source and destination addresses, which must be a complete network.
Cisco 100-105 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Network Fundamentals | 20% | 1 Compare and contrast OSI and TCP/IP models 2 Compare and contrast TCP and UDP protocols 3 Describe the impact of infrastructure components in an enterprise network a) Firewalls b) Access points c) Wireless controllers 4 Compare and contrast collapsed core and three-tier architectures 5 Compare and contrast network topologies a) Star b) Mesh c) Hybrid 6 Select the appropriate cabling type based on implementation requirements 7 Apply troubleshooting methodologies to resolve problems a) Perform fault isolation and document b) Resolve or escalate c) Verify and monitor resolution 8 Configure, verify, and troubleshoot IPv4 addressing and subnetting 9 Compare and contrast IPv4 address types a)Unicast b) Broadcast c)Multicast 10 Describe the need for private IPv4 addressing 11 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment 12 Configure, verify, and troubleshoot IPv6 addressing 13 Configure and verify IPv6 Stateless Address Auto Configuration 14 Compare and contrast IPv6 address types a) Global unicast b) Unique local c) Link local d)Multicast e) Modified EUI 64 f)Autoconfiguration g)Anycast |
| Infrastructure Maintenance | 14% | 1 Configure and verify device-monitoring using syslog 2 Configure and verify device management a) Backup and restore device configuration b) Using Cisco Discovery Protocol and LLDP for device discovery c) Licensing d) Logging e)Timezone f)Loopback 3 Configure and verify initial device configuration 4 Configure, verify, and troubleshoot basic device hardening a) Local authentication b) Secure password c) Access to device c. [i] Source address c. [ii] Telnet/SSH d) Login banner 5 Perform device maintenance a) Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify) b) Password recovery and configuration register c) File system management 6 Use Cisco IOS tools to troubleshoot and resolve problems a) Ping and traceroute with extended option b) Terminal monitor c) Log events |
| Infrastructure Services | 15% | 1 Describe DNS lookup operation 2 Troubleshoot client connectivity issues involving DNS 3 Configure and verify DHCP on a router (excluding static reservations) a) Server b) Relay c) Client d) TFTP, DNS, and gateway options 4 Troubleshoot client- and router-based DHCP connectivity issues 5 Configure and verify NTP operating in client/server mode 6 Configure, verify, and troubleshoot IPv4 standard numbered and named access list for routed interfaces 7 Configure, verify, and troubleshoot inside source NAT a) Static b) Pool c) PAT |
| Routing Fundamentals | 25% | 1 Describe the routing concepts a) Packet handling along the path through a network b) Forwarding decision based on route lookup c) Frame rewrite 2 Interpret the components of routing table a) Prefix b) Network mask c) Next hop d) Routing protocol code e) Administrative distance f) Metric g) Gateway of last resort 3 Describe how a routing table is populated by different routing information sources a) Admin distance 4 Configure, verify, and troubleshoot inter-VLAN routing a) Router on a stick 5 Compare and contrast static routing and dynamic routing 6 Configure, verify, and troubleshoot IPv4 and IPv6 static routing a) Default route b) Network route c) Host route d) Floating static 7 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution) |
| LAN Switching Fundamentals | 26% | 1 Describe and verify switching concepts a) MAC learning and aging b) Frame switching c) Frame flooding d) MAC address table 2 Interpret Ethernet frame format 3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed) 4 Configure, verify, and troubleshoot VLANs (normal range) spanning multiple switches a) Access ports (data and voice) b) Default VLAN 5 Configure, verify, and troubleshoot interswitch connectivity a) Trunk ports b) 802.1Q c) Native VLAN 6 Configure and verify Layer 2 protocols a) Cisco Discovery Protocol b)LLDP 7 Configure, verify, and troubleshoot port security a) Static b) Dynamic c) Sticky d) Max MAC addresses e) Violation actions f) Err-disable recovery |
What are the format, duration, questions, language, and passing scores of Cisco 100-105 Exam
The format of the 100-105 exam is multiple-choice. The duration of the test is 1 hour and 20 minutes. The language of the test is English. The number of questions included in the exam is 125. A candidate has to score 750 out of 1000 in order to pass the Cisco 100-105 exam with help of this website.
We are confident about the products and aim to help you pass with ease. In case of failure, we will provide a no hassle full money back guarantee for the purchasing fee.
0 Customer Reviews
Quality and ValueITbraindumps Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.
Tested and ApprovedWe are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.
Easy to PassIf you prepare for the exams using our ITbraindumps testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.
Try Before BuyITbraindumps offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.