100% HP HPE6-A80 Guaranteed Success With Testing Engine

HP HPE6-A80 Exam Overview:

HP HPE6-A80 Exam Syllabus Topics:

HP Aruba Certified Design Expert Written Sample Questions:

1. A customer requires new MCs for a large multi-site network with about 600 AP-535S ana 30,000 wireless clients. The customer requires redundancy for the MCs, with each MC being able to handle the full toad in a failover situation The network should be able to sustain the loss of a controller with stateful failover within seconds. It should be able to undergo software upgrades without downtime.
The architect has recommended two 7240XM MCs. The customer points out that 7220 MCs can support their requirements and wonders why the architect recommended me 7240XMS.
What should the architect explain?

A) The 7240XM MCs are required to support the large number of wireless clients in this network
B) The 7240XM MCS provide a higher number of concurrent GRE tunnels to support 600APs with MCS in L2 clustering.
C) The 724QXM MCs can support full CPSec tunnels with this number of APs. while the 7220 MCs cannot.
D) The 7240XM MCs have better redundant power supplies and fan tray component capabilities than 7220 MCs.

2. An indoor sports stadium has 5.000 seats in two rings:
* The stadium has a ceiling height of 72 feet (22 m).
* There is a catwalk around the perimeter of me stadium that is 54 feet (13 m) from me floor.
* There are two scoreboards at either end of the stadium
* The construction of the stadium is concrete and steel.
The customer has indicated a preference for overhead coverage, and the wireless network should support 3500 concurrent clients. The architect plans to install the APs on the catwalk to service sections of the floor below Which type or antennas are recommended for the APS that provide the overhead coverage?

A) downtilt
B) vagi
C) high gain omnidirectional
D) high gain directional

3. Refer to the exhibit.

The exhibit shows the current AP deployment In a warehouse that stores frozen food goods:
* APs are mounted on the ceiling, which is 15 feet (4.6 m) high.
* Shelves are 12 feet (3.7 m) high and are typically fully stocked.
This customer indicates that their current wireless performance is inadequate.
What should the network architect include in the new solution to resolve this issue?

A) APs deployed with directional antennas on the ceiling, due to the high 15-foot callings
B) APs deployed on the ceiling in each aisle, due to the high absorption between aisles
C) APs deployed with directional antennas and a hybrid wall-mount, ceiling-mount design
D) APS deployed on the ceiling in the same current locations, out with dual 5GHz radios

4. Compare the scenarios below. For which scenario do AP-575S meet the needs?

A) The customer needs APS mounted to a concrete building exterior to provide coverage in a 90 foot (27m) radius from the building.
B) The customer needs to mount APs in an outdoor area, but that area only has fiber cable available,
C) The customer needs APs for an indoor stadium that requires overhead coverage and directional antennas.
D) The customer needs APs for an Indoor nigh density environment In which tne customer prefers dual 5GHz operation.

5. Refer to the exhibit.

A customer needs a wireless network upgrade and has these requirements.
- Support any applications used on a wired connection
- Support up to 2500 wireless clients
- Support seamless roaming from floor to floor and building to building
- Continue to function seamlessly if one controller fails
The architect has designed the logical infrastructure for the network as shown in the exhibit Which change should the architect make to belter meet customer requirements and besl practices?

A) Combine me /25 subnets for wireless and wired users into a /16 subnet.
B) Install additional Mobility Controller.
C) Place each controller in a different VLAN and subnet.
D) Combine the /25 subnets for wireless users into a /20 subnet

Solutions: