100% Cisco 200-601 Guaranteed Success With Testing Engine

Cisco 200-601 Exam Topics:

Reference: http://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/imins2.html

Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 Exam formate below

Format: Multiple choices, multiple answers

• Length of Examination: 75 minutes
• Language: English, Japanese
• Passing score: 70%
• Number of questions: 55-65

Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 Exam topics

Candidates must know the exam topics before they start of preparation. Because it will really help them in hitting the core. Our Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 exam dumps will include the following topics:

1.0 IP Networking 20% 1.1 Describe the difference between enterprise environments and industrial environments 1.2 Describe the components for making the data flow highly available and predictable in an industrial environment (QoS, IP addressing, protocol, and hardware resiliency) 1.3 Interpret and diagnose problems that are related to QoS 1.4 Describe the differences between redundancy and resiliency requirements / approaches between the enterprise and the plant floor 1.5 Differentiate the capabilities of switch types 1.6 Describe the life cycle of a multicast group 1.7 Describe and configure the operation and use cases for NAT 1.8 Describe and configure the operation and use cases for static routing 1.9 Describe and configure VLAN trunking to a virtual switch 1.10 Describe and configure Layer 2 resiliency protocols (Spanning Tree, REP, Flex Links, and Etherchannels) 1.11 Configure switch ports (macros, threshold alarms) 2.0 Common Industrial Protocol (CIP) Knowledge and Configuration 19% 2.1 Explain the CIP connection establishment process 2.2 Explain producer/consumer models and implicit/explicit message models 2.3 Recognize communication abilities and capacities in different hardware/hardware generations (revisions) 2.4 Identify and describe the technologies that enable CIP Motion and CIP Safety 2.5 Identify the applicability, limitations, and components of a DLR implementation 2.6 Implement multicast features for CIP within a LAN 2.7 Optimize RPI on a CIP connection given a set of parameters 2.8 Enable and configure IEEE 1588 PTP at the system level 2.9 Configure the Stratix using the Add On Profile (AOP) in Studio 5000 2015 Cisco Systems, Inc. This document is Cisco Public. Page 2 3.0 ProfiNET Knowledge and Configuration 19% 3.1 Describe the differences in ProfiNET support between Cisco catalyst and Cisco Industrial Ethernet (IE) switches 3.1.a Support for VLAN 0 3.1.b Support for ProfiNET LLDP 3.1.c Support for GSDs (integration into SIMATIC STEP 7) 3.2 Describe the operation and purpose of ProfiSAFE 3.3 Describe the three basic ProfiNET devices and conformance classes 3.4 Describe the ProfiNET application classes and communication channels 3.5 Describe DCP and how it can be used for IP addressing of devices and configuration pushes 3.6 Describe ring network requirements for ProfiNET 3.7 Enable ProfiNET on the switch 3.8 Enable Layer 2 QoS to ensure ProfiNET is prioritized 3.9 Integrate the Cisco IE Switch in SIMATIC STEP 7 3.10 Configure and monitor ProfiNET alarm profiles on IE switches 4.0 Security 12% 4.1 Describe the defense in-depth approach to securing the industrial zone 4.2 Identify how a security component (hardware/software) applies to a network device to meet the network security definition of defense in depth 4.3 Describe network device hardening 4.4 Describe the concept and mechanisms of implementing logical segmentation 4.5 Identify possible options to control traffic between zones (ACLs, firewalls, VLANs) 5.0 Wireless 10% 5.1 Describe the differences between 802.11a/b/g/n/ac 5.2 Describe the components that you need to build multiple wireless networks on a single access point 5.3 Describe the difference between autonomous and controller-based access points and wireless workgroup bridges 5.4 Demonstrate a typical switchport configuration for autonomous and controller-based access points 5.5 Describe the limitations of using a workgroup bridge with a control communication 6.0 Troubleshooting 20% 6.1 Troubleshoot advanced Layer 1 problems such as mechanical deterioration, electromagnetic noise issues, and infrastructure mismatches 2015 Cisco Systems, Inc. This document is Cisco Public. Page 3 6.2 Troubleshoot VLAN trunking 6.3 Troubleshoot an error disabled port 6.4 Troubleshoot basic spanning tree port state and root priority problems 6.5 Troubleshoot Layer 3 problems by inspecting route tables and NAT tables 6.6 Troubleshoot Layer 3 problems in a VRF-lite enabled environment 6.7 Demonstrate the ability to find the location of a device within a multi-switch network given an IP address 6.8 Identify methods for troubleshooting a communication problem in a CIP environment 6.9 Troubleshoot CIP using an Ethernet/IP browse tool, command line, and a web browser 6.10 Troubleshoot device communications performance 6.11 Identify the source of cable and device faults in a DLR 6.12 Identify methods for troubleshooting a communication problem in a ProfiNET environment 6.13 Troubleshoot ProfiNET using SIMATIC STEP 7 to view network topology, use the switch command line

Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 Exam advantages below

• Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 will be confident and stand different from others as their skills are more trained than non-certified professionals.
• Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 provide opportunities to get a job easily in which they are interested in instead of wasting years and ending without getting any experience.
• Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 is distinguished among competitors. AmazonManaging Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 can give them an edge at that time easily when candidates appear for a job interview employers seek to notify something which differentiates the individual to another.
• Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 provides practical experience to candidates from all the aspects to be a proficient worker in the organization.
• Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 has the knowledge to use the tools to complete the task efficiently and cost effectively than the other non-certified professionals lack in doing so.
• Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) 200-601 has more useful and relevant networks that help them in setting career goals for themselves. Managing Industrial Networks for Manufacturing with Cisco Technologies (IMINS2) provide them with the right career direction than non certified usually are unable to get.