100% Aruba ACMP Guaranteed Success With Testing Engine

Aruba Certified Mobility Professional 6.0 Sample Questions:

1. Refer to the above screen capture. By default, which switch's internal database will be used for user authentication?

A) All three Controllers
B) Controller 10.1.11.100 only
C) Controller 10.1.11.101 and 10.254.1.3 only
D) None

2. View the Server group screen shot above.

A company has provisioned the same VAP, AAA and SSID profiles at both its Miami and NY offices. This Server Group is applied for 802.1x authentication at both locations. The user's credentials are only found in the Miami Radius server "RadiusMiami". There is no Radius synchronization. What happens when the user attempts to authenticate?

A) The controller recognizes the users Domain and sends the authentication request directly to RadiusMiami.
B) RadiusNY1 receives the request and returns a deny. No other action is taken.
C) RadiusNY1 receives the request and returns a deny. The authentications request will then be sent to RadiusMiami.
D) The request is initially sent to RadiusNY1 then RadiusNY1 redirects, the controller, to send the authentication request to RadiusMiami

3. When creating a firewall policy, which of the following parameters are required? (Choose all the correct answers.)

A) Source
B) Destination
C) Action
D) Log
E) Service

4. A Remote AP provisioned with an SSID in the operational mode "always" has which one of the following characteristics?

A) The RAP does not support this mode.
B) The RAP must obtain its configuration from the controller each time it boots.
C) The operational mode applies to tunnel and split-tunnel forwarding SSID.
D) The SSID only appears if the AP does not see the controller.
E) The operational mode applies to a Bridge forwarding SSID.

5. A port firewall policy is applied to a trunk port that denies controller access. An "allow all" Vlan firewall policy is applied to VLAN 33 on the same port. A user connected to VLAN 33 on that port attempts to gain access to the controller. What happens next?

A) When locally connected to a controllers port you always have controller access
B) The Vlan policy is applied, then the port policy, therefore no controller access
C) The Vlan policy is applied, therefore access to the controller is allowed
D) You cannot place a firewall policy on a Ports Vlan when the Port already has a policy, therefore no controller access
E) The Port policy is applied, therefore no controller access

Solutions: